Minolta Magicolor 2 Guía de usuario descargar pdf (Pagina 38)

Types 4-5

Envelope

Print on the front (address) side only. Some parts of the envelope consist of

three layers of paper—the front, back, and flap. Anything printed in these lay-

ered regions may be lost or faded.

You can print continuously with envelope. However, this could affect the

media feed, depending on the media quality and printing environment. If

problems occur, stop the continuous printing and print one sheet at a time.

Use envelopes that are

 Envelope C6 or Envelope DL size (Other envelope sizes are not sup-

ported.)

 Common office envelopes approved for laser printing with diagonal joints,

sharp folds and edges, and ordinary gummed flaps

" Because the envelopes pass through heated rollers, the gummed

area on the flaps may seal. Using envelopes with emulsion-based

glue avoids this problem.

 Approved for laser printing

 Dry

DO NOT use envelopes that have

 Sticky flaps

 Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for seal-

ing

 Transparent windows

 Too rough of a surface

 Material that will melt, vaporize, offset, discolor, or emit dangerous fumes

 Been presealed

Capacity Tray 1 Up to 10 envelopes, depending on their

thickness

Orientation Face up

Driver

Media Type

Envelope

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 124 125

Sin comentarios

Minolta Magicolor 2 Guía de usuario Pagina 38