Minolta magicolor 2210 Guía de instalación descargar pdf (Pagina 32)

Installing Printer Drivers and Software28

English

Installing Windows Drivers and Utilities via an Ethernet

TCP/IP Interface Configuration

Detailed instructions for configuring TCP/IP can be found in the

CrownBook

(in PDF format on the

Software Utilities

CD-ROM).

DHCP Installation

If you use DHCP to install TCP/IP, you must enable DHCP/WINS in

Administration/Communications/Resident NIC/CrownNet/TCPIP printer

configuration menu. See your network administrator and your

CrownBook

for further information.

Manual TCP/IP Installation

Connect your printer to the network with an Ethernet cable.

If necessary, in the Administration/Communications/Resident NIC/

CrownNet/TCPIP/Internet Address menu, enter the printer’s Internet

address.

The factory default Internet address is 161.33.128.24. If necessary,

in the Administration/Communications/Resident NIC/CrownNet/

TCPIP/Default Router menu, enter the Internet address of the default

router.

The factory default router address is 000.000.000.000. This setting

provides automatic sensing of gateways. If you identify a subnet

mask, automatic sensing is disabled.

If you want to refer to the printer by host name instead of IP address,

edit the system host table by adding the following line to the host file:

internetaddress hostname

where internetaddress is the Internet address of the printer

(Administration/Communication/Resident NIC/CrownNet/TCPIP/

Internet Address menu, and hostname is the descriptive name of

the printer). This requires administrator privileges on your network.

Contact your system administrator.

Insert the autoloading

Software Utilities

CD-ROM into your CD-ROM

drive.

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 47 48

Sin comentarios

Minolta magicolor 2210 Guía de instalación Pagina 32