Di470
An "Invalid Destination Name" message in PageScope Light when scanning to E-mail. This may also be displayed as "Invalid Distination Name".
Solution
CAUSE: Incorrect E-mail or SMTP address.
SOLUTION: Please verify that the destination E-mail address has been entered in the correct format; check that the SMTP address is correct and that a reply
address has been entered. The reply address cannot be blank. Also review the steps in bulletin 3453 .
Note: To view the above PDF(s), Acrobat* Reader must be installed. Acrobat Reader can be downloaded for free from the Adobe* Web site at:
[[http://www.adobe.com/products/acrobat/readstep2.html| URL http://www.adobe.com/products/acrobat/readstep2.html]]
* Trademark ownership information
Solution ID
0
Solution Usage
TAUS0644311EN*
Description
Information for parts number (NC2).
Solution
See KOM050648 for details.
Note: To view the above PDF, Acrobat* Reader must be installed. Acrobat Reader can be downloaded for free from the Adobe* Web site at:
[[http://www.adobe.com/products/acrobat/readstep2.html| URL http://www.adobe.com/products/acrobat/readstep2.html]]
* Trademark ownership information
Solution ID
0
Solution Usage
TAUS0644370EN*
Description
How to clear a C-05xx fuser code, including C-0500, C-0510, C-0520, etc.
Solution
C-05xx (fuser) codes can be cleared by pressing the Trouble Reset switch (S-25) on the Tech Rep Settings Switches Board. Please refer to the Di470 Field
Service Manual, page S-5 .
Note: To view the above PDF, Acrobat* Reader must be installed. Acrobat Reader can be downloaded for free from the Adobe* Web site at:
[[http://www.adobe.com/products/acrobat/readstep2.html| URL
http://www.adobe.com/products/acrobat/readstep2.html]]
* Trademark ownership information
Solution ID
0
Solution Usage
TAUS0644376EN*
Description
How to clear a C-04xx fuser code, including C-0400, C-0420, etc.
Solution
C-04xx (exposure lamp) codes can be cleared by pressing the Trouble Reset switch (S-25) on the Tech Rep Settings Switches Board. Please refer to the
Di470 Field Service Manual, page S-5 .
Note: To view the above PDF, Acrobat* Reader must be installed. Acrobat Reader can be downloaded for free from the Adobe* Web site at:
[[http://www.adobe.com/products/acrobat/readstep2.html| URL
http://www.adobe.com/products/acrobat/readstep2.html]]
* Trademark ownership information
Solution ID
0
Solution Usage
TAUS0644480EN*
Description
How to enter the service mode.
Solution
Perform the following:
1.Press the utility key.
2. Press the meter count key.
3. Press Stop, 0, 0, Stop, 0, 1 in that order.
Note: See the switches section of the Field Service Manual for further information.
Solution ID
0
Solution Usage
TAUS0644520EN*
20
Copyright 2007, Konica Minolta Business Solutions U.S.A., I nc.
September 2007
(12 paginas)
(162 paginas)
(276 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales