Di470
Solution ID
0
Solution Usage
TAUS0646288EN*
Description
Part number for the duct on the suction deck.
Solution
The part number is 4002-3603-01.
Solution ID
0
Solution Usage
TAUS0646489EN*
Description
The "Reserve" button is not shown on the LCD. What is required for the "Reserve" function to be available?
Solution
The "Reserve" function is only available on copiers with the optional HDD (Hard Disk Drive) installed. Check that the HDD option is set to "ON" by entering the
Tech. Rep. Service Mode and selecting [Function] -- [Image Memory] -- [Opt. Mem. Check].
In addition, the "Reserve" function is not available if the Data Controller/Key-counter option is installed in the copier or enabled on the copier. To check enter
the Tech Rep. Mode and then hit the [Stop] key -- [9] key to enter the security mode. Select [Key Counter] key and check that the setting is at "OFF". Please
refer to page 3-72 of the Di620 User Manual for additional information regarding the "Reserve" function.
Solution ID
0
Solution Usage
TAUS0646501EN*
Description
What is the toner bottle holder part number?
Solution
The part number for the toner bottle holder is: 4002-5211-03. Please see Bulletin 3553 for details.
Solution ID
0
Solution Usage
TAUS0646608EN*
Description
EDH-3, what is the part number for the test chart for adjusting the EDH-3?
Solution
The part number for a replacement EDH test chart is 4469-7791-01. Please add this part number to your EDH-3 parts manual.
Solution ID
0
Solution Usage
TAUS0646667EN*
Description
Fusing handle breaking.
Solution
See TNBT0500119EN00.pdf and TNBT0500119EN00_Procedure_on_Producing_Fusing_Unit.doc for details.
Note: To view the above PDF, Acrobat* Reader must be installed. Acrobat Reader can be downloaded for free from the Adobe* Web site at:
[[http://www.adobe.com/products/acrobat/readstep2.html| URL http://www.adobe.com/products/acrobat/readstep2.html]]
* Trademark ownership information
Solution ID
0
Solution Usage
TAUS0646713EN*
Description
Is there a part number for the cable that connects the scan unit CCD to PWB-B (Image Processing Board)?
Solution
Please refer to bulletin 4056, which is linked below. This is listed as PWB-ID in the Di470 Parts Manual.
Link
Solution ID
0
Solution Usage
TAUS0646803EN*
Description
Does Konica Minolta provide support for Equitrac* products?
29
Copyright 2007, Konica Minolta Business Solutions U.S.A., I nc.
September 2007
(12 paginas)
(162 paginas)
(276 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales